Centered on "3-mode switching + integrated work platform + safety compliance", the YD26 Series Multi-Purpose Ladder breaks through the pain points of traditional ladders such as "single function and no dedicated operation space". It has achieved upgrades in multi-scenario adaptability, operational convenience, and safety protection. Its core highlights are as follows:
When unfolded into a straight ladder, the height ranges from 260cm to 470cm by model: YD26-009 (260cm) is suitable for home 2.5m-high ceiling light maintenance and loft access; YD26-011 (470cm) is suitable for 4m-high store shelf organizing and 3.8m-high office air conditioner maintenance. Compared with traditional fixed straight ladders (only single height), the adaptable height range is increased by 80%, and one ladder meets multiple height needs.
When folded into a step ladder (bilaterally unfolded into an "A" shape), the step spacing is uniform (approx. 30cm calculated based on parameters B/C), and the height is 130-235cm: It is used for cleaning 2m-high kitchen cabinets at home and organizing 1.8m-high product displays in stores. The bilateral steps can accommodate 1-2 people standing at the same time, and light collaboration (such as tool passing) does not require frequent climbing up and down. Compared with ordinary step ladders (only single-sided use), the operation efficiency is increased by 50%.
By installing 2 stippled steel platforms on the steps, it can be switched to a work platform: The platform area of YD26-009 is approx. 0.3㎡ (adapting to 4×2 steps), which can hold tool boxes and parts boxes; the platform area of YD26-011 is approx. 0.6㎡, which can accommodate one person standing and placing small maintenance equipment (such as electric drills and wrench sets). It solves the pain point of traditional ladders "having no space for tools", and the operation convenience is increased by 70% compared to ladders without platforms.
With a lightweight design of 9.1kg, it can be carried by adult women with one hand. The 260cm straight ladder height is suitable for most home high-altitude scenarios: replacing living room ceiling lights, cleaning balcony cabinets, and climbing for loft storage. The work platform mode can be used for small home maintenance (such as placing screws and parts when assembling furniture). After closing, it has a compact volume and can be easily stored in small apartments. Compared with traditional household wooden ladders (weight ≥12kg), its portability is increased by 24%.
With a moderate weight of 10.6kg, it can be carried to stores by two people. The 370cm straight ladder height meets the needs of restocking 3.5m-high shelves in small-to-medium stores; the work platform mode is suitable for store product organizing (such as placing snacks and daily necessities to be displayed). One ladder replaces "home ladder + commercial ladder + temporary workbench", reducing equipment procurement costs by 60%, which is suitable for individual merchants or home users with advanced needs.
With a 12.0kg medium-heavy design, the steel lever-locking hinges and platform have strong load-bearing capacity. The 470cm straight ladder height is suitable for painting 4m-high walls during home decoration and repairing 3.8m-high light fixtures in offices; the work platform mode can be used for placing latex paint buckets and putty powder bags during decoration, avoiding frequent tool passing. Compared with lightweight ladders (weight ≤9kg), its structural stability is increased by 32%, and it has no deformation when carrying tools (within 8kg) for a long time, meeting moderate operation intensity.
The lever-locking hinges are made of high-quality steel, which can withstand 180kg tension without loosening after locking. Manual unlocking is required to switch modes, preventing accidental mode changes during operation; the wide-base anti-slip feet have a large contact area with the ground (single foot contact area ≥150cm²), with a friction coefficient of 0.85 on smooth tiled floors. The anti-slip performance is 50% better than ordinary narrow-base feet, with no slipping risk in rainy or humid environments.
The entire series passes the EN 131 standard 180kg load test (1.2x rated load) with no deformation for 1 hour; the steel components undergo anti-rust treatment (no rust after 48-hour salt spray test) and can be used in oily maintenance workshops and outdoor humid environments; the stippled steel platform shows no wear after 1,000 stepping tests, with a service life of ≥7 years. Compared with ordinary aluminum alloy ladders (service life 5 years), its durability is increased by 40%.
Scenario Requirement: A user lives in a 90㎡ small apartment and needs to replace a 2.5m-high living room ceiling light, clean an 1.8m-high kitchen cabinet, and assemble a children's bed (requiring temporary placement of screws and parts). Only small tools can be stored on top of the wardrobe, so the ladder needs to be easy to store and usable as a temporary workbench.
Operation Process:
- Take YD26-009 (approx. 130cm after closing) from the top of the wardrobe, carry it to the living room with one hand, unfold it into a straight ladder mode (260cm), fit the bottom anti-slip feet to the tiled floor, and replace the ceiling light.
- Fold it into a step ladder mode, move it to the kitchen to clean the cabinet, and place cleaning tools on the bilateral steps.
- When assembling the children's bed, switch to the work platform mode, place screws and wrenches on the steel platform without finding an extra table. After operation, retract the ladder and tuck it into the balcony storage cabinet.
Result: 3 modes + work platform, solving the problems of "climbing tools occupying space and no temporary workbench" in small apartments. One ladder replaces 3 types of tools, saving storage and procurement costs.
Scenario Requirement: A user is decorating a duplex building and needs to install 2.2m-high corridor baseboards on the second floor, repair 2.8m-high light fixtures in the stairwell, and paste 3m-high decorative paintings on the first-floor living room wall (requiring placement of picture frames and glue).
Operation Process:
- Two people cooperate to carry YD26-010 (10.6kg) to the second floor, unfold it into a step ladder mode to install baseboards, and place tool boxes on the wide steps.
- Move it to the stairwell, switch to the straight ladder mode to repair the light fixtures, and the anti-slip feet fit the stairwell concrete floor without displacement.
- When pasting decorative paintings, switch to the work platform mode, place the picture frames and glue on the platform to avoid chaos. After decoration, retract the ladder and lean it in the corner of the second-floor storage room.
Result: Multi-mode adaptation to irregular scenarios avoids the "unstable placement" risk of traditional ladders in stairwells, and reduces the number of tool transports during decoration, improving efficiency.
Scenario Requirement: A convenience store needs to organize 3.5m-high snack shelves 3 times a day. Clerks need to carry code scanners and price tag papers, so the ladder needs to have tool storage space and be easy to carry.
Operation Process:
- Clerks take YD26-010 from beside the cash register, carry it to the shelf area with two people, unfold it into a straight ladder mode (370cm), and fit the bottom anti-slip feet to the tiled floor.
- During restocking, place the code scanner and price tag papers on the temporarily assembled work platform, which is within easy reach without frequent climbing up and down. One shelf is organized in 15 minutes.
- After restocking, retract the ladder and place it in the gap at the bottom of the shelf without occupying the customer passage.
Result: Work platform + portability, 40% more efficient in restocking compared to traditional metal ladders (without tool storage space), reducing the physical consumption of clerks.
Scenario Requirement: A decoration company needs to paint latex paint on 4m-high living room walls for a client and install decorative strips at a height of 3.8m. The ladder needs to be tall and capable of holding paint buckets and tools.
Operation Process:
- Workers carry YD26-011 (12.0kg) to the construction site, unfold it into a straight ladder mode (470cm) to paint the walls, and the lever-locking hinges have no shaking after locking.
- When installing decorative strips, switch to the work platform mode, place the paint bucket and tape measure on the steel platform. One person can operate independently without others passing tools.
- Complete construction of 2 rooms in one day without carrying "ladder + workbench", reducing transportation costs by 50%.
Result: High adaptability + work platform, reducing tool transportation volume, and avoiding wall pollution caused by spilled paint buckets, improving construction quality.
A1: Support is not recommended, as there is a slight overload risk. The rated load-bearing capacity of the equipment is 150kg, and the total weight of the person and tools (155kg) exceeds the limit by 5kg: Short-term (within 10 minutes) light operations (such as fetching items) may not cause obvious deformation, but long-term or frequent use will cause fatigue of the steel hinges and shorten the service life; if tools need to be picked up frequently (generating additional impact force), it may also trigger slight loosening of the hinges, increasing the risk of ladder displacement. It is recommended that the total load be controlled within 150kg and the tool weight not exceed 10kg to ensure safety.
A2: This is mostly caused by dust accumulation or insufficient lubrication of the hinge, and can be fixed by following these steps:
- Dust Cleaning: Use a brush to clean dust and impurities in the gaps of the lever-locking hinge, then blow off residual debris with compressed air to prevent impurities from jamming the mechanical structure;
- Lubrication Maintenance: Apply lithium-based grease to the contact between the hinge's movable shaft and the locking buckle (a thin layer to avoid dust adhesion), and toggle the lever repeatedly 3-5 times to distribute the grease evenly and relieve jamming;
- Structure Inspection: If jamming still occurs, check whether the hinge's fixing screws are loose. Tighten the M6 screws with a wrench (tighten clockwise until there is no looseness, and avoid over-tightening to prevent stripping). After tightening, the adjustment smoothness can be restored by 90%.
A3: A single person can reduce the burden through correct posture + auxiliary tools. The specific tips are as follows:
- One-Hand Carrying Posture: Hold the reinforced handles on the side of the ladder (located on both sides of the center of gravity) with both hands, tilt the ladder at 60°, and let the bottom fit the legs to reduce arm effort with the help of body support; move slowly when walking and avoid rapid turning to prevent center of gravity deviation. This method can save 30% of physical strength and is suitable for short-distance (within 10 meters) transportation;
- Auxiliary Cart Use: For transportation over 30 meters (such as from the warehouse to the construction site), place the ladder flat on a flat cart with a load-bearing capacity ≥20kg, and push it with one hand without lifting, saving 70% of physical strength;
- Two-Person Lifting (Recommended): Two people stand at both ends of the ladder respectively, hold the handles, and lift the ladder to waist height at the same time (avoid bending) to move it horizontally. It is suitable for long-distance transportation and reduces waist stress.
A4: This problem can be solved by increasing the stress area + auxiliary support. The specific solutions are as follows:
- Paving Anti-Slip Mats: Place a 60×40cm rubber anti-slip mat (2cm thick, friction coefficient ≥0.9) under each bottom foot of the ladder to increase the contact area with the gravel ground and prevent slipping; the surface of the anti-slip mat can be pressed into the gravel gaps to further enhance stability;
- Installing Ground Anchors: If the gravel layer is thick (≥10cm), insert 2 50cm-long metal ground anchors into the ground on both sides of the ladder (2m apart), and connect the ladder to the ground anchors with chains to form two-way fixation and avoid ladder tilting;
- Choosing Solid Areas: Try to use the ladder in areas where the ground under the gravel is solid soil or concrete. If operation on soft gravel ground is unavoidable, it is recommended that two people hold the sides of the ladder respectively to ensure no shaking during operation and avoid accidents caused by single-person operation.
Product Tags:
|
|
Multi-Purpose Ladder: 150kg Load, 3 Modes, Work Platform for Home/Commercial Use Images
|
